ECU CODING

XTOOL D7 ECU coding tool has advanced ECU coding function, which can reprogram adaptive data of certain components after replacement to enhance vehicle performance, and refresh hidden functions to customize car settings and disable annoying functions.

FULL SYSTEM DIAGNOSTIC

XTOOL D7 automotive diagnostic scan tool enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information as trouble and event codes and live data for various vehicle control systems, such: ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System etc.

BIDIRECTIONAL(ACTIVE TEST)

XTOOL D7 is a bi-directional scanner that allows you to request information or command modules to perform specific tests and functions while observing the resulting data for troubleshooting and quick fixes without using the vehicle controls. Bi-directional control feature saves machinists/shops a lot of time and helps them get more work done every day.

36+ ADVANCED MAINTENANCE SERVICES

1.Oil Reset: Reset new calculation of Engine Oil Life System for an accurate reading of next oil change.

2.EPB Reset: Reset the calipers, brake discs or pads after electronic parking brake system is repaired.

3.BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

4.DPF Regeneration: Clear diesel particles from the filter through oxidation or combustion to stabilize the filter performance.

5.Key Programming: Disable a lost vehicle key to protect the vehicle from being stolen and add new key.

6.Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

7.ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.

8.SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

9.Throttle Relearn: Reset the throttle to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

10.Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.


Also Including:


TPMS Reset, Air Suspension, Gear Learning(Crankshaft Relearn), Gearbox Match, Headlight Adjustment, Window Initialization, Seat Configurations, Disable Transportation, Tire Upgrade, Electronic Pump Activation, Power Balance, A/F Reset, Start/Stop Reset, Language Change, Reset Control Unit, Rain/Light Sensor, A/C Relearn, HV Battery, VGT Relearn, FRM Reset, SRS, Clutch Adaptation, Speed Limit. Other features are still under development

KEY FOB PROGRAMMING

The IMMO service can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like Programming new key fobs, Read PIN code/pin code calculation,Check number of keys, Generate key, Add key, All key lost

FCA AUTOAUTH & CAN FD & DOIP

XTOOL D7 OBD2 diagnostic scanner supports SGW gateway access via registered AutoAuth to get diagnostic access to read/clear dtcs, run bi-directional tests, scan all systems, and get resets & relearn etc for 2018 and later FCA-SGW vehicles,for Chrysler, for Dodge, for Jeep, etc

XTOOL D7 supports CAN FD Protocol for GM 2020+, and DoIP for BMW, for Mercedes-Benz, for Land Rover 2018+, ensuring fast, stable communication without the need for extra adapters.

8 IN 1 LIVE DATA

Reads, graphs and combines 8 independent streams of sensor data. Real-time data export to CSV file and data recording, playback, viewing. Allows you to export live data to a csv file for storage and comparison over time, or to view its graphical changes and textual readouts later.

FULL 10 OBD2/EOBD FUNCTIONS

1. Read Trouble Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Clear Trouble Codes: Turns off Check Engine Light (MIL), clears codes and resets monitors

3. Live Data: Show the information of continuous data stream from a vehicle in live graphic display.

4. Read Freeze Frame: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

5. Read ECU Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

6. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their Operability.

7. On-Board Monitor Test: Retrieves and displays test results for emission-related power train components and systems.

8. O2 Sensor Monitoring Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

9. I/M Readiness: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

10. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

AUTO VIN

XTOOL D7 auto diagnostic scan tool automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.If automatic scan cannot be supported, you can choose manual input or selection.

1. Auto VIN Scan: XTOOL D7 automotive diagnostic system features the latest VIN-based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECU and run diagnostics on the selected system.

2. Manual VIN Input: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.

3. Automatic Selection: The Auto VIN Scan can be selected after selecting the test vehicle manufacturer

4. Manual Selection: When the vehicle’s VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.

DIAGNOSTIC REPORT 2.0

With XTOOL D7 V2.0 car diagnostic tools, you can generate a full system Diagnostic Report by one-click. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card, Also, You can customize your name , your address and other information on this report.

FOR 85+ CAR MAKER, 140+ BRANDS, COVERED 10,000+ CARS

XTOOL D7 Automotive Diagnostic Tools Compatible with 1996 and newer American, European, Asian, China and Australian brand vehicles, including 12V vehicles such as SUVs, sedans, pickups, and light-duty trucks

Europe Cars:
For DEMO, for VW, for MINI, for LANDROVER, for SEAT, for FERRARI, for FORD, for OPEL, for ALFA for ROMEO, for VOLVO, for ABARTH, for SMART, for BMW, for FIAT, for LANCIA, for RENAULT, for ASTONMARTIN, for GAZ, for MASERATI, for MEREDES, for UAZ, for SKODA, for CITROEN, for DACIA, for AUDI, for JAGUAR, for PORSCHE, for PEUGEOT

America Cars:
For DEMO, for GM, for FORD, for CADILLAC, for CHEVROLET, for GMC, for HUMMER, for JEEP, for SATURN, for PONTIAC, for LINCOLN, for DODGE, for CHRYSLER, for BUICK

Asia Cars:
For Demo, for TOYOTA for LEXUS ,for ISUZU, for MAZDA, for KIA, for INFINITI, for ACURA, for NISSAN, for RENAILTSAM, for HYUNDAICY, for HYUNDAI, for HONDA, for SUBARU, for SUZUKI, for MITSUBISHI, for SSANGYONG

Russian Cars:
For ZAZ,IZH,PAZ,UAZ,VAZ,GAZ,Lada....

Australia Cars:
For Demo, for Ford, For Hondo

Brazilian Cars:
For FIAT of Brazilian, For GM of Brazilian

China Cars:
For DEMO, fro JAC, for CHERY, for GEELY, for GREAT WALL, for BYD, for LIFAN

22 KINDS OF LANGUAGE

English,French,German,Russian,Spanish,Polish,Italian,Portuguese,Dutch, Danish, Japanese, Finnish, Arabic, Korean,Vietnamese,Thai, Norwegian,Turkish,Hungarian, Greek,Swedish,Traditional Chinese.

STEPS ON HOW TO SET THE LANGUAGE
1. Activate the device with email address and serial number

2. Switch language in settings

3. Click Update Device

PARAMETER

Operating System：Android 10.0 O.S.

Display：7.0 inch 1024 X 600 resolution

Power and Battery：5000mAh, 3.7V

Memory：2GB+64GB

Power Consumption：8W

Power Voltage：5V

Processor：Quad-core 1.6GHz Processor

Connectivity：Micro USB+WIFI(2.4Ghz & 5Ghz)

Dimension (L*W*H)：218*150*29mm

Sensors：Gravity sensor, light sensor

PACKING LIST

D7 V2.0 Smart Diagnostic Tablet * 1

VGA Main Cable * 1

OBD II-16 Connecter * 1

Micro USB Cable * 1

Charger for Tablet * 1

EU Charger Adapter * 1

US Charger Adapter * 1

User Manual * 1